Banner AMG - Page 13

July 17, 2023
Asset Monitoring Gateway With SNAP ID Instruction Manual


13
Vibration Sensor Runtime Thresholds
AppliesonlytotheQM30VT2vibrationsensorrunningtheVIBE-IQ®machinelearningalgorithm.Thisallowsauserto
globally set, for all connected vibration sensors, how the threshold settings for a vibration sensor are applied. These
threshold settings define an active ON state for the monitored motor or rotating asset.
DefinableACTIVEONvaluesarethexaxisandzaxisvelocity/acceleration.Thesampleperiodisthecycletimetheal
gorithmusestodeemasampleapplicable.Thealgorithmdiscardsreadingsunderthedefinedthresholds.VIBEIQtypi
cally requires 300 samples to accurately baseline a machine. If an application has a consistently operating rotating asset,
with low standard variability, it may be acceptable to quickly retrieve an accurate baseline with a shorter sampling period.
An asset with more extensive variability often requires a longer sampling period to characterize its behavior.
Global VIBE-IQ screen
© Banner Engineering Corp.