Banner R-GAGE T30R - PC Requirements and Dimensions; Software PC Requirements; T30 R-1515 Models Dimensions; T30 R-4545 Models Dimensions

6.3 PC Requirements
Operating System
Microsoft
®
Windows
®
operating system version 10
5
Hard Drive Space
500 MB
Third-Party Software
.NET
USB Port
Available USB port
Important: Administrative rights are required to install the Banner Radar Configuration software.
6.4 Dimensions
All measurements are listed in millimeters [inches], unless noted otherwise.
T30R-1515 Models
M30 X 1.5
Integral QD Models 150 mm QD Models
M12 X 1
Ø40.6
[1.60]
Ø15.0
[0.59]
23.4
[0.92]
63.8
[2.51]
52.9
[2.08]
8.1
[0.32]
22.2
[0.87]
M30 X 1.5
M12 X 1
Ø40.6
[1.60]
Ø15.0
[0.59]
52.9
[2.08]
51.3
[2.02]
10.9
[0.43]
22.2
[0.87]
Measurement
Reference Point
150 mm Pigtail
T30R-4545 Models
Integral QD Models 150 mm QD Models
M30 X 1.5
M12 X 1
Ø40.6
[1.60]
Ø15.0
[0.59]
23.4
[0.92]
63.8
[2.51]
46.2
[1.82]
22.2
[0.87]
Measurement
Reference Point
M30 X 1.5
M12 X 1
Ø40.6
[1.60]
Ø15.0
[0.59]
52.9
[2.08]
51.3
[2.02]
10.9
[0.43]
22.2
[0.87]
150 mm Pigtail
5
Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States and/or other countries.
R-GAGE
®
T30R Sensor
24 www.bannerengineering.com - Tel: + 1 888 373 6767