1. Download the latest version of the software from www.bannerengineering.com/us/en/products/sensors/software/
radar-configuration.html.
2. Navigate to and open the downloaded file.
3. Click Install to begin the installation process.
4. Depending on your system settings, a popup window may appear prompting to allow Banner Radar Configuration to
make changes to your computer. Click Yes.
5. Click Close to exit the installer.
R-GAGE
®
T30R Sensor
www.bannerengineering.com - Tel: + 1 888 373 6767 7
To Next Page
Loading...
