Baofeng UV-3R+ - Page 13

a BAOFENG
NOTE:
[CTCSS:67Hz---254.1Hz(50 groups);DCS:
023N-754N(104 groups)]
4)Press [ U/V] key to save the setting and EXIT.
Press [MENU/LOCK] or [PTT] , EXIT to
normal operation.
SQL (SQUELCH ADJUSTMENT)
Squelch System allows you to mute the background
noise when no signal being received. The Squelch
system make 'Standby' operation more pleasant,
and significantly reduces battery current
consumption. Please adjust the Squelch level
according to the following instructions:
1)Press [ MENU/LOCK ] , rotate the [ DIAL]
knob, come to MENU [3]: SQL
2)Then press [ U/V ] key, come to the default
setting level SQL 5
3)Clockwise or counterclockwise rotation of
[DIAL] knob to adjust between
0/1/2/3/4/5/6/7/8/9 (Default Squelch level as
5). Select the level at which the background
noise is just eliminated when there is no signal.
Press [ U/V] key to save the setting.
4)Press [ MENU/LOCK ] or [PTT] , EXIT to
normal operation.
18
7 N
anor
ENG
LIGHT(LCD ILLUMINATION ON/KEY/OFF)
UV-3R includes a reddish illumination lamp which
aids in nighttime operation. The red illumination
yields clear viewing of the display in a dark
environment, with minimal degradation of your
night vision. Three options for activating the lamp
are provided:
Key: Illuminates the LCD when any key pressed.
ON: Illuminates the LCD continuously.
OFF: Disables the LCD lamp.
Here is the procedure for setting up the Lamp
mode:
1)Press [ MENU/LOCK ] , rotate the [ DIAL]
knob, come to MENU [4]: LIGHT.
2)Then press {uv} key to enter the set mode.
3)Clockwise or counterclockwise rotation of bn
{ DIAL } knob to set ON/OFF/KEy
4)Press {uv} key to save the setting.
5)Press { MENU/LOCK] or [ PTT] , EXIT to
normal operation.
BEEP (KEYPAD BEEPER ON/OFF)
If the Keypad Beeper will inconvenience you
(especially being operated in the silent room), you
may disable the Beeper according to the following
instructions:
19
4 NX