Baofeng UV-3R+ - Page 14

a BAOFENG
1)Press [ MENU/LOCK ] , rotate the [ DIAL]
knob, come to MENU [5]: BEEP
2)Then press [ U/V ] key to enter the set mode.
3)Clockwise or counterclockwise rotation of
[ DIAL ] knob to set ON/OFF
4)Press [ U/V] key to save the setting.
5)Press [ MENU/LOCK ] orPTT] , EXIT to
normal operation.
(ON-The beeper being activated, LCD displays
icon. OFF-The beeper being disabled.)
VOX(VOICE OPERATED TRANSMISSION)
VOX eliminates the necessity of manually switching
to the transmission Mode each time you want to
transmit. The transceiver automatically switches
to transmission mode when the VOX circuitry
senses that you have begun speaking into the
microphone. Please set according to the following
instructions:
1)Press [ MENU/LOCK ] , rotate the [ DIAL }
knob, come to MENU [6]: VOX
2)Then press {uv ] key to enter the set mode.
3)Clockwise or counterclockwise rotation of
{ DIAL ] knob to set:OFF/1/2/3/4/5/6/7/8/9
4)Press [ U/V] key to save the setting.
20
7 ‘N
BAOFENG
5)Press [ MENU/LOCK ] or [ PTT] , EXIT to
normal operation.
NOTE:
Grade 7-9: the Most Sensitive VOX Gain Level-
Set under silent conditions.
Grade 4-6: the Medium Sensitive VOX Gain
Level—Set under common conditions.
Grade1-3: the Least Sensitive VOX Gain Level-
Set under too much noise conditions.
When VOX function is activated, the LCD will
display the ICON 'VOX'.
POWER (HIGH/LOW RF OUTPUT
POWER SELECTION)
Select the High/Low RF Output Power, please set
according to the following instructions:
1)Press [ MENU/LOCK ] , rotate the [ DIAL }
knob, come to MENU [7]: POWER
2)Then press [ U/V ] key to enter the set mode.
3)Clockwise or counterclockwise rotation of
{ DIAL } knob to set: HIGH/LOW
4)Press [ U/V] key to save the setting.
5)Press [ MENU/LOCK ] or [ PTT] , EXIT to
normal operation.
When set the LOW output power, the LCD will
display the ICON { Low ] , and not display the
ICON [ HIGH) , when set the HIGH output power.
21
7 XN