1. Safety
• Special care for Laser B eams: Special care should be used when DLP projectors are us ed in the same room as high pow er
laser equipment. D irect or indirect hitting of a laser beam on to the lens can severely da mage the Digital Mirror Devices
TM
in
which cas e there is a loss of warranty.
• Never place the projector in direct s un light. S un light on the lens can severely damage the Digital Mirror Devices
TM
in wh ich
case there is a loss of warranty.
• Save t he original shipping carton and packing material. They will come in handy if you ever have to ship your equipment. For
maximum protection, repack your s et as it w as o riginally packed at the factory.
• Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for
cleaning. Never use strong solvents, such as thinner or benzine, or abra sive cleaners, since these wil
l damage the c abinet.
Stubborn s tains may be removed with a cloth lightly dampened w ith mild detergent solution.
• To ensure the highest o ptical performance and resolution, the projection lenses are specially treated with an anti-reflective
coating, therefore, avoid touching the lens. To remove dust on the lens, use a soft dry cloth. Do not use a damp cloth, detergent
solution, or thinner.
• Rated max imum ambient temperature, t
a
=35°C(95°F).
• The lamp hou se shall be replaced if it has become damaged o r thermally deformed.
On servicing
• Do not attempt to service this pr oduct yourself, as o pening or removing cov ers may e xpose you to dan gerous voltage p otentials
and risk of electric shock.
• Refer all s ervicing to qualified service personnel.
• Attempts to alter the factory-set internal controls or to c hange other control settings not s pecially dis cussed in this m anual c an
lead to permanent dam age to the projector and cancellation of the warranty.
• Unplug this pr oduct from the wall outlet and refer servicing to qualified service technicians under the following conditions:
- When the power cord or plug is damaged or frayed.
- If liquid has bee n spilled into the equipment.
- If the produ ct has been exposed to rain or water.
- If the product does not operate norm ally when the ope rating instructions ar e followed. Adjust only those controls that are
covered by t he operating instructions since improper adjus tment of the other c on
trols may r esult in damage and will often
require extensive work by a qualified technician to restore the pr oduct to normal operation.
- If the product has been dropped or the cabinet has b een dam aged.
- If the product exhibits a distinct change in performance, indicating a need for service.
• Replacement pa rts: When replacement pa rts are required, be sure the service technician has used original Barco replac ement
parts or authorized replacement parts which have the same characteristics as the Barco original part. Unauthorize d substitu-
tions m ay result in degraded performance and reliability, fire, electric shock or other hazards. Unauthorized substitutions may
void w arra nty.
• Safety chec k: Upon c ompletion of any service or repairs to this projector, ask the service technician to perform safety checks
to determine that the product is in proper operating condition.
• Possible explosion hazard: Always keep in mind the caution below:
CAUTION: Xenon comp act arc lamps are highly p ressu rized. W hen ignited, the norm al operating temperature
of the bulb increases the pressure to a level at which the bulb may explode if not handled in strict accord ance
to the manufacturer’s instructions. The bulb is stable at room temperature, but may still explode if dropped or
otherwise mishandled. W hen ever the lamp house, containing a xenon lamp , has to be dism antled or when ever
the protective container or cloth has to be removed from the xenon lamp , authorized protective clothing MU ST
be worn!
To prevent battery explosion
• Danger of explosion if battery is incorrectly installed
.
• Replace only with the same or equivalent type recommended by the manufacturer.
• For disposal of used batteries, always consult federal, state, local and provincial hazardous was te disposal r ules and regulations
to ensure proper disposal.
6 R5905050 DP2K C-SERIES 10/07/2012
To Next Page
Loading...
Need help?
General