Barco G62 Series - Page 100

R5914653 /02 G62100
Level 2 Level 3 Level 4 Level 5 Default
Uart Command
Orientation [HKSB9]
Custom
RGBCMY
[HKSB10]
Multi-Projection [HKSB11]
Reset Selective [HKSB12]
Network Ethernet LAN Interface RJ-45 RJ-45 [LANI0]
HDBaseT [LANI1]
MAC Address N.A. [LMAC?]
Network Status N.A. [LMNS?]
DHCP Checkbox Unchecked [LDHC0] /
[LDHC1]
IP Address - - - . - - - . - - - . -
- -
192.168.1.100 [LIPA"***.***.***.
***"]
Subnet Mask - - - . - - - . - - - . -
- -
255.255.255.0 [LSUB"***.***.
***.***"]
Gateway - - - . - - - . - - - . -
- -
192.168.1.51 [LGAT"***.***.***.
***"]
DNS - - - . - - - . - - - . -
- -
0.0.0.0 [DNSG"***.***.
***.***"]
Apply Yes / Cancel Cancel [LAPY1]
Network Reset Yes / Cancel Cancel [NFRS1]
Control Crestron Checkbox Checked [CREN0] /
[CREN1]
IP Address - - - . - - - . - - - . -
- -
192.168.0.2 [CRIP"***.***.***.
***"]
IPID 0~9 5 [CRID*]
Port 0~65535 41794 [CRPO*****]
Crestron Setup
Apply
Yes / Cancel Yes [CRAP1]
Extron Checked [EXEN0] /
EXEN1]
PJ Link Checked [PJEN0] /
[PJEN1]
Service 192.168.0.3 [PJIP"***.***.***.
***"]
PJ Link Setup
Apply
Yes [PJAP1]
AMX Checked [AXEN1] /
[AXEN0]
Telnet Checked [TEEN1] /
[TEEN0]
HTTP Checked [HTEN1] /
[HTEN0]
Reset Yes / Cancel Cancel [CNRT1]
Baud Rate Serial Port In 1200 115200 [SPBI0]
2400 [SPBI1]
4800 [SPBI2]
9600 [SPBI3]
19200 [SPBI4]
38400 [SPBI5]
Communication protocols