43R5914653 /02 G62
7.1 Lens
About lens settings
Configure the lens settings to adjust the image quality and position.
Focus
Adjust the focus of the image.
Zoom
Adjust the size of the projected image.
Lens Shift
Adjust the lens position to shift the projected area.
Lens Memory
This projector can save up to five lens settings, which records the lens position.
• Save Memory: Select a record from 1 to 5 to save the current lens settings.
• Apply Memory: Select a record from 1 to 5 to apply the lens settings.
• Clear Memory: Clear the saved lens records.
Lens Calibration
Calibrate the lens position to return it to the center. To prevent damage to the projector and the lens, always
perform lens calibration before replacing the lens.
Lens Lock
Lock the lens to prevent the lens motors from moving, which disables all lens functions.
Reset
Reset the function settings to factory default values.
7.2 Orientation
About orientation
Configure the projection orientation according to the projector’s installation direction.
Ceiling Mount
Enable the function for ceiling mount installation.
Direction
Select Front Projection or Rear Projection based on the projector’s relative position to the screen.
7.3 Aspect Ratio
Possible aspect ratios
Set the aspect ratio of the projected image. The available options are:
• Auto (default)
• 4:3
• 16:9
• 16:10
User controls — Installation
To Next Page
Loading...
Need help?
General
