67R5914653 /02 G62
10.3 On Screen Display
About on screen display
Set up the on screen display menus.
Menu Location
Select the menu location from Top Left, Top Right, Center, Bottom Left, and Bottom Right.
Menu Transparency
Set the menu transparency level.
Menu Timer
Set the length of time the menu displays on the screen.
Show Message
Enable or disable the corner information messages, such as input source, IP address, and so on.
Background
Set a background color to display when no input signal is detected. The available options are Blue, Black,
White, and Logo.
Reset
Reset the menu settings to default factory values.
10.4 Logo Setup
About logo setup
Set up the logo for the startup screen.
Change Logo
Change the logo for the startup screen. Apart from the Default logo, user can select also Captured Logo.
• Default Logo: The default startup screen.
• Captured Logo: The logo is saved via the Logo Capture function.
• Save: Save the captured logo.
Delete Logo
Delete the saved Captured Logo.
10.5 Schedule
About schedule
Schedule the project functions to operate automatically at the set time.
System menu
To Next Page
Loading...
