71R5914653 /02 G62
Fade-In
This function allows the fading in effect when turning off shutter. The time for the fading effect can be adjusted
from 0.5s to 5s.
Fade-Out
This function allows the fading out effect when turning on shutter. The time for the fading effect can be
adjusted from 0.5s to 5s.
Startup
Select the shutter behavior when turning on the projector.
10.10 Security
About security
Set up the projector security options.
Security
Enable to protect the projector with a password. If the user enters incorrect password three times, a message
will pop up warning that the projector shuts down in 10 seconds.
Security Timer
Specify the length of time the projector can be used without the password. Once the timer counts to 0, the user
must enter a password to use the projector. The timer restarts every time the projector is turned on.
Change Password
Change the password required to operate the projector.
10.11 Backlight
About backlight
Set up the projector backlight options for the keypad and power key.
Keypad
Enable or disable the keypad backlight.
Power Key
Enable or disable the backlight for the power key.
10.12 High Altitude
About high altitude
Check the option to increase the fan speed. To ensure the image quality and prevent damage to the projector,
enable High Altitude mode in high temperature, high humidity, or high altitude environment.
10.13 12V Trigger
About 12V trigger
When enabled, the projector screen is automatically raised or lowered when the projector is turned on or off.
This function only works when the projector is connected to an electrical projector screen.
System menu
To Next Page
Loading...
Need help?
General
