Barco G62 Series - Page 56

R5914653 /02 G6256
PIP / PBP
PIP/PBP (picture in picture/picture by picture) allows simultaneously displaying two images from two input
sources.
• PIP/PBP: Select the appropriate PIP/PBP mode or disable the function.
- Off: Disable PIP/PBP mode.
- PIP: Display one input source on the main screen and the other input source in an inset window.
- PBP: Display two images of the same size on the screen.
• Main Source: Select an input source for the main image. The available input sources are HDMI1, HDMI2,
DVI-D, 3G-SDI, and HDBaseT.
• Sub Source: Select an input source for the second image. The available input sources are HDMI1,
HDMI2, DVI-D, 3G-SDI, and HDBaseT.
• Swap Source: Swap the main source and sub source.
• Sub Image Size: Change the display size of the sub source in PIP mode.
• Sub Position: Adjust the position of the sub image. In the layout chart below, the "P" indicates the main
image:
- PBP Layout
PBP Layout
PBP, Main Left
P
PBP, Main Right
P
PBP, Main Top
P
PBP, Main Bottom
P
- PIP Layout
PIP Layout
PIP Size
Small Medium
Large
PIP, Bottom Right
P
P
P
PIP, Bottom Left
P
P
P
PIP, Top Left
P
P
P
PIP, Top Right
P
P
P
- PIP/PBP Compatibility
PIP/BPB
Matrix
HDMI-1 HDMI-2 DVI-D 3G-SDI HDBaseT
HDMI-1 — V V V V
HDMI-2 V — V V V
User control — Image menu