9. Image
A
B
Image 9-32
White balance : In the projector, we will set the contrast for each color until we get a 100% light o
utput picture when projecting a
100% white image (image A)
Black balance : In the projector, we will set the brightness for each color until we get a 0% light output picture when projecting a
100% black image (image B).
The changeover from min to max is indicated by the apparition of bright spots also called “digital noise”
An alternative to a full screen White/black pattern is the standard g
ray scale pattern, the white bar will be used
for white balance and the black bar for black balance.
Image 9-33
How to adjust
1. Press Menu to activate the menus and select Image → Imag e Settings → Input Balance.
Image 9-34
Main menu, Image
Image 9-35
Image adjustments
R5905032 HDX SERIES 20/11/2014 115
To Next Page
Loading...
