13. Projector Control
Image 13-93
Buttons, standby
2. Press ENTER to toggle between [Lamp only] and [Lamp and Power].
Lamp only : only lamp will be switched off when Standby is pressed. Other electronics remain powered.
Lamp and Power : lamp will be switched off and projector will be powered down.
13.8.2 Shortcut keys
What can be done?
An overview of the shortcut allocations with the corresponding menu is given. Those printed in bold are allocated.
The allocated shortcut keys can be cleared within this menu.
For the creation of a short cut key, see "Shortcut keys to the menus", page 73
How to clear a shortcut key
1. Press Menu to activate the menus and select Projec tor Control → Buttons → Shortcut keys.
Image 13-94
Main menu, projector control
Image 13-95
Projector control, buttons
Image 13-96
Buttons,shortcutkeys
Image 13-97
Shortcut allocations
2. Use the ▲ or ▼ key to select the desired key and press ENTER to remove the allocation.
R5905032 HDX SERIES 20/11/2014
249
To Next Page
Loading...
