13. Projector Control
Image 13-74
DMX Art-Net activation
2. Press ENTER to toggle between [On] and [Off].
13.7.5 Front XLR output voltage control
What can be done ?
The output voltage on the front XLR connector can be enabled or disabled.
The output voltage level can be set to 0V, 9V, 12V or 24V.
DMX Art-Net can also enable the output voltage on the front XLR connector. To avoid that per accident a voltage is activated via
DMX Art-Net, set level to 0 V
How to enable or disable
1. Press Menu to activate the menus and select Pr ojector Control → DMX → O utp ut voltage enable.
Image 13-75
Main menu, projector control
Image 13-76
Projector control, DMX
R5905032 HDX SERIES 20/11/2014 243
To Next Page
Loading...
