8. Input
Image 8-24
Main window
Image 8-25
Input, no signal
Image 8-26
No signal, color
8.7.2 Background Logo
What can be done ?
A logo can be switched on or off.
When logo is switched on and a logo is available, that logo will be displayed when no signal is available for the main window an no
signal available for the PiP window in case PiP is On.
How to activate logo
1. Press Menu to activate the menus and select Input → No S ignal. → Lo go.
2. Press ENTER to toggle between [On] or [Off].
Image 8-27
Main window
Image 8-28
Input, no signal
R5905032 HDX SERIES 20/11/2014 85
To Next Page
Loading...
