14. Service
Image 14-66
Main menu, service
Image 14-67
Service, refill mode
2. Press ENTER to select. Use the ▲ or ▼ key to select Yes.orNo and press ENTER.
Image 14-68
If you want to start the refill mode, select Yes.
If you do not want to start the refill mode, select No.
14.10 Save Custom Settings
What can be done ?
The current custom settings can be saved to internal backup device in the same way as it would be done when the projector lamp
was switched off.
When settings are changed when the lamp is off, a manual Save custom settings must be executed to save the changes.
When the message S aving data is displayed, never switch off the projector.
How to save
1. Press Menu to activate the menus and select Service → Save Custom Settings.
286
R5905032 HDX SERIES 20/11/2014
To Next Page
Loading...
