Barco HDX W18 - Sync Loop through

12. Alignment
Image 12-164
Main window
Image 12-165
Alignment, 3D glasses
2. Press ENTER.
3. Use the ▲ or ▼ key to select L /R O utput Reference Delay
Image 12-166
Output reference dellay
4. Use the ◄ or ► key to change the L/R Output Reference Delay value until the correct value is reached.
12.15.3 3D Sync Loop Through
What can be done?
The incoming 3D sync signal can routed to the 3D sync output connector.
How to activate
1. Press Menu to activate the menus and select Alignment → 3D G lasses.
Image 12-167
Main window
Image 12-168
Alignment, 3D glasses
2. Press ENTER.
3. Use the ▲ or ▼ key to select 3D S ync Loop Through.
R5905032 HDX SERIES 20/11/2014
217