To Next Page

To Previous Page

4. Troubleshooting

Code 10008: “system - over temperature detected” (Warning)

Situation Solution

The global environment

temperature is too high.

This can generate picture

artefacts.

Check the dust ﬁlters, check the fan speeds in communicator. If the

problem persists, escalate the issue including a log package from the

system.

Code 10009: “system - temperature to high on audio DSP” (Warning)

Situation Solution

The temperature measured

on the Audio DSP is too high.

Check the dust ﬁlters, check the fan speeds in communicator. If the

problem persists, escalate the issue including a log package from the

system.

Code 10010: “system - temperature to high on ICP FPGA” (Warning)

Situation Solution

The temperature measured

on the ICP FPGA is too high.

Check the dust ﬁlters, check the fan speeds in communicator. If the

problem persists, escalate the issue including a log package from the

system.

Code 10011: “system - temperature to high on IMB FPGA” (Warning)

Situation Solution

The temperature measured

on the IMB FPGA is too high.

Check the dust ﬁlters, check the fan speeds in communicator. If the

problem persists, escalate the issue including a log package from the

system.

Code 10012: “system - temperature to high o n PPC” (Warning)

Situation Solution

The temperature measured

on the embedded processor

is too high.

Check the dust ﬁlters, check the fan speeds in communicator. If the

problem persists, escalate the issue including a log package from the

system.

Code 10014: “formatter - satellite conﬁguration error” ( Error)

Situation Solution

One or more satellite boards

are not conﬁgured.

Restart the projector. If the problem persists, escalate the issue

including a log package from the system.

Code 10015: “formatter - satellite hardware mismatch” (Error)

Situation Solution

The three satellites are not of

thesametype.

Restart the projector. If the problem persists, escalate the issue

including a log package from the system.

Code 10016: “formatter - DMD ﬁ le checksum error” (Error)

Situation Solution

The DMD conﬁguration ﬁle is

corrupted.

Restart the projector. If the problem persists, escalate the issue

including a log package from the system. An update of the ICMP (in

the same version or in a more recent version) can help restore the

conﬁguration ﬁles.

18 R5906594 ICMP 09/11/2016

Brand	Barco
Model	ICMP
Category	Server
Language	English

Barco ICMP User Manual

Table of Contents

Other manuals for Barco ICMP

Questions and Answers:

Barco ICMP Specifications