5. ICMP service procedure
5.3 Removing a HDD fro m the ICMP
In case the ICMP has to b e returned to factory (e.g. for repair) the non defective HDDs
should be removed and kept.
How to remove a HDD ?
1. Switch off the projector.
2. Moving the latch towards the left.
Image 5-5
3. Push the unlock button to open the handle.
Image 5-6
4. Pull the HDD out of its slot.
Image 5-7
To install the HDD see procedure "Installing a H DD into the ICMP", page 72.
R5906594 ICMP 09/11/2016 71
To Next Page
Loading...
Need help?
General