4. Troubleshooting
Code 10502: “ICM P - invalid command arguments - command rejected” (Error)
Situation Solution
The operation requested
from the user interface has
failed because the data
received by the ICMP are not
as expected.
Check the compatibility between the Barco (Web) Commander or TMS
version and the ICMP version.
Code 10503: “ICMP - command not implemented” (Error)
Situation Solution
The operation is not
implemented in the current
ICMP version.
The Barco (Web) Commander or TMS version is more recent than the
ICMP. Check that the ICMP version is up to date.
Code 10504: “ICMP - upd ate running - command rejected” (Error)
Situation Solution
The operation is not available
while the ICMP is being
updated.
Wait for the end of the update and try again.
Code 10505: “ICMP - system shutting d own - command rejected” (Error)
Situation Solution
The operation is not available
while the projector is entering
sleep mode.
Wait for the projector to be in sleep mode, then wake the projector up
to execute the operation.
Code 10506: “ICMP - system starting - command rejected” (Error)
Situation Solution
The operation is not available
because the ICMP is not fully
started.
W ait for the projector to be fully started.
Code 10507: “ICMP - invalid user login - login d enied” (Error)
Situation Solution
The login is denied because
the user name or password
are not correct.
Perform a valid login.
Code 10508: “ICMP - insufficient user rights - command rejected” (Error)
Situation Solution
The operation was rejected
because it requires higher
user rights.
Check the current user and log in as a user with higher privileges.
The operation is not available
because the current user
session has expired.
Perform a valid login.
R5906594 ICMP 09/11/2016 25
To Next Page
Loading...
Need help?
General