To Next Page

To Previous Page

4. Troubleshooting

Code 10071: “system - I2C error reading Audio DSP temperature” (Error)

Situation Solution

There was a problem with

the temperature sensor that

monitors the Audio DSP

temperature.

Restart the projector. If the problem persists, escalate the issue

including a log package from the system.

Code 10072: “system - I2C error reading ICP FPGA temperature” (Error)

Situation Solution

There was a problem with

the temperature sensor that

monitors the ICP FPGA

temperature.

Restart the projector. If the problem persists, escalate the issue

including a log package from the system.

Code 10073: “system - I2C error reading IMB FPGA temperature” (Error)

Situation Solution

There was a problem with

the temperature sensor that

monitors the IMB FPGA

temperature.

Restart the projector. If the problem persists, escalate the issue

including a log package from the system.

Code 10074: “system - I2C error reading Power PC t emperature” (Error)

Situation Solution

There was a problem with

the temperature sensor

that monitors the processor

temperature.

Restart the projector. If the problem persists, escalate the issue

including a log package from the system.

Code 10075: “system - HDD power error” (Error)

Situation Solution

The power monitor detected

a fault on the Hard disk

power circuit.

Restart the projector. If the problem persists, escalate the issue

including a log package from the system.

Code 10076: “system - Video Mezzanine FPGA version mismatch” (Warning)

Situation Solution

The ﬁrmware version on the

Video Mezzanine add-on

board does not match the

ICMP software package.

Re-install the ICMP software package. If the proble

m persists, escalate

the issue.

Code 10501: “ICMP - unexpected error” (Error)

Situation Solution

The operation has failed for

an unexpected reason.

Retry the operation. Restart the projector if the error still occurs. If

the problem persists, escalate the issue including a log package from

the system.

The ICMP reports a default

error status.

Restart the projector. If the problem persists, escalate the issue

including a log package from the system.

24 R5906594 ICMP 09/11/2016

Brand	Barco
Model	ICMP
Category	Server
Language	English

Barco ICMP User Manual

Table of Contents

Other manuals for Barco ICMP

Questions and Answers:

Barco ICMP Specifications