116 Barco - RHDM-2301 - User manual
Full functionality description
Figure 38: “anti-aliasing”(a-c) and “Sharpness”(d-f) settings in the OSD submenu “Resizer set-
tings”
Pixel shape:
•
Point
: No corrections for the pixel shape are applied.
•
Square
: A correction for the square form of the pixels of the LCD panel is taken into account.
This leads to a sharper image.
•
Diamond
: A correction for the square form of the pixels of the LCD panel is taken into account
combined with a correction for the case a surface integration has been done at the side of the
camera.
Steepness:
Sets the type of interpolation which is used for determining the values at the pixels of
the resized image.
To Next Page
Loading...
