Barco RHDM-2301 - Page 117

Barco - RHDM-2301 - User manual 117
Full functionality description
• Linear (see figure below-a): The value of the intermittent pixels is determined by a linear inter-
polation of the sampling points.
•
Super (see figure below-b): The area between two sampling points is divided in 3 equidistant
parts. The value at the sub-pixels situated in the middle area is determined by linear interpola-
tion while the value of the sub-pixels situated in the outer 2 areas is equal to the value of the
nearest sampling point.
•
Nearest (see figure below-c): No interpolation is applied. Down to sub-pixel level, the value of a
sub-pixel is equal to the value of the nearest sampling point.
Figure 39: “Steepness” settings in the OSD submenu “Resizer settings”