R5911443 /11 UDM162
Option / Domain Setting Factory setting
WQXGA (W devices)
WUXGA (U devices)
Source Source files Standard
3D Sync delay 0 µs
Swap eye Off
Dark time lowest value available
Test patterns Test Pattern Off, none selected,
Note: All uploaded custom test patterns
will be deleted
“No signal” image Black image selected.
Note: Uploaded custom “no signal”
images will be deleted.
ImageTiltedBright-
ness
Tilted brightness uniformity correction Disabled, all values reset to 0
Uniformity DynaBlack Off
Warp Screen size 5120x3200 / 2560x1600
4 corner
Bow
Warp disabled, no warp
Warp files Disabled
Note: all uploaded warp files will be
deleted
LinkedServices Linked CLO Disabled
Network Communication LAN, Automatic settings
Optics High Contrast Off
PJLink PJ-Link support Disabled
PJ-Link authentication Off
PJ-Link controller IP address or host name removed.
Peripheral Settings for External Cooler Cooling mode set to internal.
Settings for Motorized Frame All values to mid value
Profiles Settings for projector profiles All profiles will be deleted, presets will be
cleared
Scheduler Weekly schedule Disabled, Schedule is fully cleared.
Screen Screen luminance unit nits
Screen Luminance 400
HDR Boost 1.0
System Auto dim Enabled
Auto light source off Disabled, timer set to 10 minutes.
Auto standby Mode / Eco standby Mode
(depending on availability)
Disabled, default mode depends on
projector type.
Operational Mode Normal
Time Time server Automatic disabled, NTP server removed
GUI – System Settings
To Next Page
Loading...
