BCS36x8
ex
Series Connection example
Type 17-A1S4-*HP* and B7-A2S4-****
Page 28 of 78
Subject to technical changes.
05/2020
7. Bluetooth BCS3678
ex
hand-held scanner
7.1 Connection USB to PC via universal supply module
7.1.1 Components required
Functional system
BCS3678
ex
-IS
ATEX / IECEx Zone 1/21
NEC / CEC Class I, II, III Division 1
BCS3678
ex
-NI
ATEX / IECEx Zone 2/22
NEC / CEC Class I, II, III Division 2
1 x Bluetooth BCS3678
ex
hand-held scanner
Type: 17-A1S4-2HP1 Type: B7-A2S4-2HP1 or B7-A2S4-2ER1
1 x Universal supply module for hand-held scanners
ATEX / IECEx Zone 1/21
Type: 17-A1Z0-0019
ATEX / IECEx Zone 2/22
Type: B7-A2Z0-0043
NEC / CEC Class I, II, III Division 2
Type: B7-A2Z0-0043US
To be provided by the customer
1 x
1 x USB connection cable to the host PC.
Maximum cable length supported: 5 m
Number of cores and recommended cable cross section: see BARTEC User Manual.
(http://automation.bartec.de/scanner.htm)
NB:
– USB only functions as SPP (Serial Port Profile), HID is not supported.
The universal supply module is detected by the host PC as a serial connection (virtual
COM interface)
– Please use standard, shielded data lines to prevent external disturbances.
Recommendation: e.g. use CAT5, similar or higher quality cables
1 x PC with USB 2.0 or USB 3.0 interface
1 x
Terminal program or software keyboard wedge for testing virtual COM communication and data
transmission on the host PC.
To Next Page
Loading...
Need help?
General
