BCS36x8
ex
Series Connection example
Type 17-A1S4-*HP* and B7-A2S4-****
Subject to technical changes.
05/2020
Page 47 of 78
The hand-held scanner is directly connected via Bluetooth to the host PC with the Bluetooth
module. Data transmitted from the hand-held scanner will be processed by the host PC as
keyboard entry.
Further customized settings can be performed with the help of the Zebra Product Reference
Guide or the Zebra 123Scan utility.
10.1.4 Testing communication/data transmission
The hand-held scanner is detected as HID device. The scanned data is transmitted as HID (Human Interface
Device). The hand-held scanner functions in this mode as a keyboard entry.
Testing communication/data transmission
Open any program, such as Word, Notepad, Excel or other.
Read the barcode with the scanner and check that data are displayed in the active field in the open program.
Data transmission is OK when the barcode data is displayed.
If not, check connection and programming.
To Next Page
Loading...
Need help?
General
