BCS36x8
ex
Series Connection example
Type 17-A1S4-*HP* and B7-A2S4-****
Page 68 of 78
Subject to technical changes.
05/2020
14. Supply module Ex i BT with BCS3678
ex
hand-held
scanner
14.1 Connection USB via supply module Ex i BT – type: 17-A1Z0-0028
(e.g. on Ex-HMI)
14.1.1 Components required
Functional system
BCS3678
ex
-IS
ATEX / IECEx Zone 1/21
NEC / CEC Class I, II, III Division 1
1 x Bluetooth BCS3678
ex
hand-held scanner
Type: 17-A1S4-2HP1
1 x Supply module Ex i BT for hand-held scanners
ATEX / IECEx Zone 1/21
Type: 17-A1Z0-0028
To be provided by the customer
1 x
1 x USB connection cable to the host PC.
Maximum cable length supported: 5 m
Number of cores and recommended cable cross section: see BARTEC User Manual
NB:
– USB only functions as SPP (Serial Port Profile), HID is not supported.
The universal supply module is detected by the host PC as a serial connection (virtual
COM interface)
– Please use standard, shielded data lines to prevent external disturbances.
Recommendation: e.g. use CAT5, similar or higher quality cables
1 x Ex-HMI device with USB 2.0 or USB 3.0 interface
The Ex relevant data of the power supply module Ex i BT must match the Ex-relevant data of the
Ex- HMI or any other Ex device.
The Ex-relevant data of the BARTEC systems can be found in the corresponding Ex certificates,
user manuals and data sheets. (www.bartec.com )
1 x
Terminal program or software keyboard wedge for testing virtual COM communication and data
transmission on the host PC.
To Next Page
Loading...
Need help?
General
