Bartec Pro Series User Manual

Bartec USA TPMS PRO Series User Guide Rev5.1 Table of Contents
Page 36
8.1 Settings
TPM ID: Select to display sensor IDs in DECIMAL or HEXIDECIMAL format.
Pressure: Change how pressure is displayed on the tool screen. Choose between PSI or Bar.
Temperature: Select units between Celsius or Fahrenheit.
Display Contrast: Adjust tool display contrast.
Lang.: Select Language for tool. Select English, Spanish or French.
Date/Time: The PRO Series tool has an internal clock that allows the data storage to be
date/time stamped based on when the action took place. Using this setting allows the user to
adjust the date/time if necessary.
NOTE:
Upon initial start-up or complete power loss, the tool will prompt the user through
setting the date/time as part of the tool setup.
Restore Defaults: Resets all settings to factory values. The user will be prompted to confirm upon selecting this feature.

Bartec Pro Series Specifications

General

Brand	Bartec
Model	Pro Series
Category	Diagnostic Equipment
Language	English