Bartec Pro Series User Manual

Bartec USA TPMS PRO Series User Guide Rev5.1 Table of Contents
Page 38
8.3.1 Enabling Bluetooth
To enable or disable Bluetooth on your tool, select Bluetooth
and press Enter, then choose Enabled or Disabled
accordingly and press Enter to save.
NOTE:
Bluetooth must be Enabled on your tool in order to
pair to a PC or Bluetooth Printer. The Bluetooth
menu will not display additional pairing options until
Bluetooth is set to Enabled.
8.3.2 Pair to a PC
To pair the PRO Series tool to a PC with TPMS Desktop:
1. Ensure the PC you are pairing to has Bluetooth
capabilities (see Section 1.7
for details).
2. Open TPMS Desktop on your PC and click Settings.
Click to expand the Bluetooth heading, and ensure
the boxes for Connectable and Discoverable are
checked (if they are blank, click to check them off).
NOTE:
Keep the TPMS Desktop application open throughout the rest of this process.
2

Bartec Pro Series Specifications

General

Brand	Bartec
Model	Pro Series
Category	Diagnostic Equipment
Language	English