Need help?Do you have a question about the Basalte B.link and is the answer not in the manual?
Details on setting the B.link's IP address, gateway, and subnet mask.
Configuration of up to three IP-connected surround receivers via ETS.
Defining input objects to trigger IR, Serial, or KNX commands.
Defining output objects for integrating KNX commands into scenarios.
Steps for connecting and establishing initial network connectivity for B.link Flex.
Configuring the B.link Flex module via its web interface.
Methods for creating and managing IR codesets for device control.
Creating and managing serial instructions for RS232 controlled devices.
Defining the network topology of B.link Flex modules and connected devices.
Defining macros to create scenarios using IR, Serial, and KNX commands.
General| Manufacturer | Basalte |
|---|---|
| Enclosure Material | Aluminum |
| Protection Class | IP20 |
| Relative Humidity | non-condensing |
| Color | Black |
| Communication | Ethernet, TCP/IP |
| Storage Temperature | -20°C to +70°C (-4°F to +158°F) |
To Next Page