B.link
Manual
27 / 32 v.1.1 © 2014 basalte
5.4 Commands
The Commands tab allows you to define macros that can be used to create powerfull scenarios. A
macro will send out a sequence of instructions, which can be a combination of IR codes, Serial
codes and even KNX commands. You can also a define a time interval between the instructions.
Each command or macro has a KNX trigger object and a trigger value, which should correspond to
the B.link ETS configuration.
5.4.1 Managing Commands
The Add group and Add command commands in the Left pane allowsyou to manage &ndgroup
the different macros . With the right mouse click, the command or group can be edited or deleted.
You can also use drag & drop to move commands between groups.
IMPORTANT : Each command must have a unique name.
To Next Page
Loading...