Basler DECS-250 - Page 339

9440300990 31-9
DECS-250 Specifications
On-Line Overexcitation Limiting
High Current Level
Pickup
Range ............................................... 0 to 40 Adc
Increment ......................................... 0.1 Adc
Time
Range ............................................... 0 to 10 s
Increment ......................................... 1 s
Medium Current Level
Pickup
Range ............................................... 0 to 30 Adc
Increment ......................................... 0.1 Adc
Time
Range ............................................... 0 to 120 s
Increment ......................................... 1 s
Low Current Level
Pickup
Range ............................................... 0 to 20 Adc
Increment ......................................... 0.1 Adc
Off-Line Overexcitation Limiting
High Current Level
Pickup
Range ............................................... 0 to 40 Adc
Increment ......................................... 0.1 Adc
Time
Range: .............................................. 0 to 10 s
Increment: ........................................ 1 s
Low Current Level
Pickup
Range ............................................... 0 to 20 Adc
Increment ......................................... 0.1 Adc
Sequence of Events Recording (SER)
Over 1,000 records are stored in nonvolatile memory (retrievable via BESTCOMSPlus®). The SER can
be triggered by: Input/Output status changes, system operating status changes, or alarm annunciations.
Data Logging (Oscillography)
Up to 6 variables can be logged. The sampling rate is 1,200 data points per log, up to 1,199 pre-trigger,
4 ms to 10 s intervals, (4.8 s to 12,000 s total log duration).