Need help?Do you have a question about the Basler DECS-100 and is the answer not in the manual?
General| Brand | Basler |
|---|---|
| Model | DECS-100 |
| Category | Control Systems |
| Language | English |
Overview of DECS-100 features, capabilities, and technical specifications.
Details on front panel indicators and their functions.
Explanation of the DECS-100's operational principles and features.
Guidance on mounting, wiring, and setting up the DECS-100.
Procedures for upkeep and resolving common issues.
Summary of changes to DECS-100 hardware versions over time.
Summary of changes to DECS-100 firmware versions over time.
Summary of changes to BESTCOMS software versions for DECS-100.
Summary of updates made to the DECS-100 instruction manual.
Overview of the General Information section content.
Detailed list of the DECS-100's features and operational capabilities.
Explanation of how DECS-100 model and style numbers define its features.
Technical specifications including operating power, sensing, and environmental data.
Overview of the Human-Machine Interface section.
Description of the eight red LEDs on the DECS-100 front panel.
Details on the rear panel RS-232 port for PC communication and setup.
Overview of the Functional Description section.
Explanation of the internal components and their roles in DECS-100 operation.
Detailed description of the DECS-100's operating modes and functions.
Introduction to the installation process for the DECS-100.
Guidelines for physically mounting the DECS-100 unit.
Detailed wiring diagrams and terminal assignments for DECS-100.
Specific mounting and wiring for CE compliance.
Initial setup steps before operating the DECS-100.
Information on making adjustments via external switching or software.
Steps to install the BESTCOMS software on a PC.
Procedure for connecting and communicating between DECS-100 and PC.
How to view, modify, and send settings using BESTCOMS software.
Configuration of sensing voltage, limiter mode, and frequency settings.
Adjusting setpoints, startup parameters, and voltage matching settings.
Configuration of stability parameters like Proportional, Integral, and Derivative gains.
Viewing metered values and alarm signals for AVR, FCR, VAR, and PF modes.
Configuration of overvoltage, loss of sensing, and limiter protection parameters.
Monitoring operational status, controls, and alarm indicators.
Automatic calculation and management of PID parameters for generator stability.
Managing settings files for saving, uploading, and printing.
Securing DECS-100 settings with a password.
Procedure for safely closing communication with the DECS-100.
Process for updating the DECS-100's internal firmware.
Recommended periodic checks for DECS-100 connections.
Step-by-step guide to resolve issues with voltage build-up.
Troubleshooting steps for low generator output voltage.
Troubleshooting steps for high generator output voltage.
Steps to diagnose and fix voltage regulation problems.
Procedures to address unstable generator output or hunting.
Troubleshooting when the Overexcitation Shutdown indicator is lit.
Troubleshooting when the Loss of Generator Sensing indicator is lit.
Troubleshooting when the Overexcitation Limiting indicator is lit.
Troubleshooting when the Underexcitation Limiting indicator is lit.
Troubleshooting when the Underfrequency Active indicator is lit.
Steps to resolve issues related to the droop function.
Steps to resolve issues with the voltage matching feature.
To Next Page
