Standard Features
Basler scout 201
9.7 Binning (All Models Except scA750-60)
Binning increases the camera’s response to light by summing the charges from adjacent pixels into
one pixel. Two types of binning are available: vertical binning and horizontal binning.
With vertical binning, adjacent pixels from 2 lines, 3 lines, or a maximum of 4 lines in the imaging
sensor array are summed and are reported out of the camera as a single pixel. Figure 68 illustrates
vertical binning.
Fig. 68: Vertical Binning
With horizontal binning, adjacent pixels from 2 columns, 3 columns, or a maximum of 4 columns are
summed and are reported out of the camera as a single pixel. Figure 69 illustrates horizontal bin-
ning.
Fig. 69: Horizontal Binning
The binning feature is only available on the monochrome cameras.
The binning feature is not available on scA750-60 cameras.
To Next Page
Loading...
