Basler Scout - 12-Pin Receptacle Pin Assignments; Pin Numbering

Physical Interface
Basler scout 51
5.2.2 12-pin Receptacle Pin Assignments
The 12 pin receptacle is used to access the two physical input lines and four physical output lines
on the camera. The pin assignments for the receptacle are shown in Table 8.
Pin numbering for the 12-pin receptacle is as shown in Section 5.2.3 on page 51.
5.2.3 Pin Numbering
Fig. 33: Pin Numbering for the IEEE 1394b Socket and the 12-pin Receptacle
Pin Designation
1 Not connected
2 Not connected
3 I/O Input 1
4 I/O Input 2
5 I/O Input Gnd
6 I/O Output 1
7 I/O Output 2
8 Not connected
9 Not connected
10 I/O Output VCC
11 I/O Output 3
12 I/O Output 4
Table 8: Pin Assignments for the 12-pin Receptacle
1
12
2
3
4
5
6
7
8
9
10
11
12 34
5
6
7
89