Basler Scout - Output Line Response Time

Physical Interface
Basler scout 63
5.7.3 Output Line Response Time
Response times for the output lines on the camera are as shown below.
Fig. 38: Output Line Response Times
Time Delay Rise (TDR) = 1.5 µs
Rise Time (RT) = 1.3 - 5.0 µs
Time Delay Fall (TDF) = 1 - 20 µs
Fall Time (FT) = 1 - 5 µs
The response times for the output lines on your camera will typically fall into the
ranges specified above. The exact response time for your specific application will
depend on the external resistor and the applied voltage you use.
Camera
Output
Signal
Output
Line
Voltage
Time
TDR
RT
TDF
FT
90%
90%