Basler Scout - Connector Pin Assignments and Numbering; IEEE 1394 B Socket Pin Assignments

Physical Interface
50 Basler scout
5.2 Connector Pin Assignments and
Numbering
5.2.1 IEEE 1394b Socket Pin Assignments
The IEEE 1394b socket is used to supply power to the camera and to interface video data and
control signals. The pin assignments for the socket are as shown in Table 7. Note that these are the
standard pin assignments for IEEE 1394b sockets.
Pin numbering for the IEEE 1394b socket is as shown in Section 5.2.3 on page 51.
Pin Signal
1 TPB - (twisted pair B minus)
2 TPB + (twisted pair B plus)
3 TPA - (twisted pair A minus)
4 TPA + (twisted pair A plus)
5 TPA R (twisted pair A ground)
6 VG (power ground)
7 Not connected
8 VP (+8 to +36 VDC power)
9 TPB R (twisted pair B ground)
Table 7: Pin Assignments for the IEEE 1394b Socket