Basler Scout - Mechanical Specifications; Standard Housing; Camera Dimensions and Mounting Points

Specifications, Requirements, and Precautions
24 Basler scout
1.5 Mechanical Specifications
1.5.1 Standard Housing
The camera housing conforms to protection class IP30 assuming that the lens mount is covered by
a lens or by the cap that is shipped with the camera.
1.5.1.1 Camera Dimensions and Mounting Points
The cameras are manufactured with high precision. Planar, parallel, and angular sides guarantee
precise mounting with high repeatability.
The dimensions in millimeters for cameras equipped with a standard C-mount lens adapter are as
shown in Figure 21. The dimensions for cameras equipped with an optional CS-mount lens adapter
are shown in Figure 22 on page 26.
Camera housings are equipped with four mounting holes on the top and four mounting holes on the
bottom as shown in the drawings.