Revision History
282 Basler scout
AW00012504000 12 Oct 2007 Modified mechanical drawings in Section 1.5.1.1 on page 24
(dimensions), Section 1.5.2.1 on page 29 (dimensions), Section 1.5.2.2 on
page 31 (front module reference planes), and deleted excess receptacle in
Figure 22 in Section 1.5.1.1 on page 24.
Added note on internal dust seal in Section 1.9 on page 37.
Added warning not to remove the serial number in Section Section 1.9 on
page 37.
Updated times in Section 5.7.3 on page 63.
Corrected receptable pin assignments in Fig 36 in Section 5.7.3 on
page 63.
Removed note on scA750-60 output in Sections 8.2.4, 8.2.5, 8.3.6, 8.3.7,
8.3.8.
Corrected sequence of colors for Bayer BG 12 Packed format in
Section 8.3.5 on page 170.
Minor corrections throughout the manual.
AW00012505000 21 Dec 2007 Added guidelines for avoiding EMI and ESD problems in Section 2.1.1 on
page 34.
Corrected the voltage ranges relating to logic 0 and logic 1in Section 5.7.1
on page 57.
Added references to Application Notes AW000565xx000 in Section 7.3.1
on page 83 and Section 7.9.1 on page 129.
Added reference to binning in Section 9.6 on page 198.
Added the binning feature in Section 9.7 on page 158.
Added the Gamma feature in Section 9.10 on page 213.
Added the Disable Parameter Limits feature in Section 9.12 on page 228.
Added the Debouncer feature in Section 9.13 on page 229.
Minor corrections throughout the manual.
AW00012506000 15 Feb 2008 Included the "Software Licensing Information" section on page 34.
Moved the guidelines for avoiding EMI and ESD problems to Section 1.7
on page 35.
Included the warning related to code snippes in Section 1.9 on page 37.
Transferred the "Software and Hardware Installation" section to the
"Installation and Setup Guide for Cameras Used with Basler’s pylon API",
(AW000611xx000).
Added the reference to the "Installation and Setup Guide for Cameras
Used with Basler’s pylon API" in Section 2 on page 41.
Corrected the minimum value for the Timer Delay Raw parameter and
indicated the minimum value for the Timer Delay Time Base Abs
parameter in Section 6.2.4.2 on page 71.
Doc. ID Number Date Changes
To Next Page
