Basler Scout - Page 298

Index
288 Basler scout
D
debouncer
and exposure start delay
................141
explained
........................................229
setting
.............................................230
default configuration set
........................243
device firmware version parameter
.......241
device ID parameter
..............................241
device model name parameter
.............241
device scan type parameter
..................241
device vendor name parameter
............241
digital shift
.............................................191
dimensions
..............................................29
disable parameter limits
explained
........................................228
E
electromagnetic interference ...................35
electrostatic discharge
............................35
EMI
..........................................................35
environmental requirements
...................36
ESD
.........................................................35
event
Acquisition Start Overtrigger
...........235
Event Overrun
.................................235
Exposure End
.................................235
Frame Start Overtrigger
..................235
event reporting
......................................235
exposure
overlapped
..............................128, 130
exposure active signal
..........................131
exposure auto
.......................................223
exposure mode
timed
.........................................99, 111
trigger width
............................100, 112
exposure modes
...................................111
exposure start delay
..............................140
exposure time
controlling with an external trigger
signal
........................................98, 109
maximum possible
..........................116
minimum allowed
............................116
setting
.....................................116, 117
exposure time abs parameter
.....................
...........................................93
, 95, 106, 118
exposure time base abs parameter
......117
exposure time raw parameter
...............117
F
factory setup ................................. 243, 245
auto functions factory setup
........... 243
high gain factory setup
................... 243
standard factory setup
.................... 243
frame
...................................................... 79
frame counter chunk
............................. 251
reset
............................................... 252
frame rate
controlling with an external trigger
signal
........................................ 98, 110
maximum allowed
........................... 148
frame readout time
............................... 141
frame start trigger
................................... 80
details
............................................... 92
frame start trigger delay
(standard mode)
................................... 101
frame start trigger mode parameter
93, 104
frame transmission end time
................ 141
free run
................................................. 120
front module
........................................... 29
functional description
.............................. 45
G
gain ....................................................... 181
setting
..................................... 182, 186
gain auto
............................................... 221
gamma correction
................................. 213
H
hardware trigger
acquisition start
........................ 90, 109
frame start
........................................ 98
horizontal binning
................................. 201
horizontal mirror image
......................... 204
housing
90° head
....................................... 1, 29
standard
....................................... 1, 24
humidity
.................................................. 36
I
IEEE 1394b device information .............. 55
image acquisition control mode
legacy
............................................... 77
standard
........................................... 77
image distortion
.................................... 203