Batca omega 4 - Page 14

Batca Fitness Systems 14 Omega 4 Owner's Manual
Step 5:
All Flat Washers and Nylocks are
3/8” unless otherwise noted.
Item # Part # Description Qty
127 BFP-10963 Leg Press Base Connector 1
102 BFP-51747 SHCS 3/8” x 3” 2
111 BFH-50146 3/8” Flat Washer 4
112 BFH-50157 3/8” Nylock 2
Figure 5
Skip this step if leg press was not purchased. Go on to
Step 7.
Make Sure the two SHCS
3/8” x 3” Bolts Are
Tightened before moving on. If not
it will be very difficult to reach
these bolts after next step. Do
not tighten the rest of the bolts
until Step 6.