Batca omega 4 - Page 28

Batca Fitness Systems 28 Omega 4 Owner's Manual
CAB-14006
188 7/8”
All Flat Washers and Nylocks are
3/8” unless otherwise noted.
Item # Part # Description Qty
121 CAB-14006 Ab Crunch to Low Pulley 1
75 BFH-50173 3 1/2” Pulley 1
76 BFH50174 4 1/2” Pulley 2
77 BFP-52157 4 1/2” Wide Groove Pulley 1
78 BFP-51746 1/2” Pulley Spacer 2
94 BFH-50351 1 3/8” Shoulder Bolt 2
97 BFP-51759 SHCS 3/8” x 2” 1
98 BFP-51752 SHCS 3/8” x 2 1/4” 1
99 BFP-52382 SHCS 3/8” x 2 1/2” 1
100 BFP-51750 SHCS 3/8” x 2 3/4 4
108 BFH-50267 5/16” Nylock 1
111 BFH-50146 3/8” Flat Washer 10
112 BFH-50157 3/8” Nylock 7
Step 18:
Figure 18
Every place that a
pulley is inside a tube
there must be a pulley
spacer in use instead of a
flat washer.
Large Stop Ball
on cable goes
down on this end.
Start Cable Routing here.
You must take the Large
Stop Ball and the strap
end off of the cable in
order to route it.
1 3/8” Shoulder
Bolt
5/16” Nylock