Operating Manual for BAUER ECOSTAR 6000 11
3.1 IRRIGATION MENU
The irrigation menu offers the option of precisely adapting the irrigation to the respective field. With the
zone settings, you can set a different retraction speed or irrigation amount for a specific section. The
ECOSTAR 6000 offers the ability to divide the field up into 4 different sections.
Depending on the unit of the retraction speed, the irrigation amount is shown in mm or the retraction
speed in m/h on the irrigation menu.
Up to 12 different programs can be configured and then easily selected.
A long press of the button (3 seconds) opens the program configuration. A program can be activated or
deactivated by pressing the button briefly.
Target irrigation amount [mm]: The irrigation amount for the program is configured here. This
setting is only used when no zones have been created.
Pre irrigation: Pre-irrigation for this program can be configured here.
Post irrigation: Post-irrigation for this program can be configured here.
To Next Page
Loading...
