Operating Manual for BAUER ECOSTAR 6000 7
2.1 INFO SCREEN
Various information about the irrigation is displayed in the Info screen.
The configured and current speed (target / actual) as well as the currently extended length and the
calculated stop time are displayed. It is also possible to configure a sprinkler and a signal lamp here. This is
done by pressing the corresponding button once briefly to open the menu of the sprinkler or the signal
lamp. If the button is lit green, the sprinkler and/or the signal lamp is active. When deactivated, the button
is gray.
Pressing the button with the arrow takes you to the logs.
The value for the pressure is only shown if the pressure sensor option is activated in the base settings.
The Open and Close Valve buttons can be used to manually open or close the valve. This is useful for
blowing out the machine, for example.
Gear shift:
With the gear shift button in the upper right corner, it is possible to lower the turbine speed to change the
gear. The turbine slows its speed for as long as the button is pressed or until the speed is 0.
To Next Page
Loading...
