Operating Manual for BAUER ECOSTAR 6000 8
2.1.1 SPRINKLER
There are a number of different options for programming the sprinkler.
It is only ever possible to select and program one option.
Status: The sprinkler is activated or deactivated here.
Option 1: x minutes after the start, for x meters over which the sprinkler is retracted, the sprinkler is
activated.
Based on this example: 10 minutes after the start, the irrigation is activated and remains
activated until the sprinkler has been retracted 100 meters.
Option 2: Once only x meters of pipe is still deployed, the sprinkler is activated up until the end of the
irrigation.
Based on this example: At a remainder of 300 meters deployed pipe, the sprinkler valve is
activated until the end.
Option 3: At hh/mm, the sprinkler switches on for x minutes.
Based on this example: At 10:00, the sprinkler switches on for 20 minutes.
To Next Page
Loading...
