Bauer Ecostar 6000 - ECOSTAR Machine Control Settings; ECOSTAR Machine Data 4;5; ECOSTAR Valve Closing Delay; ECOSTAR Low Pressure Valve Closing

Operating Manual for BAUER ECOSTAR 6000 18
Page 4
Closing the valve: Shut-off delay
Closing at low pressure: Low pressure shut-off only: Time for which the shut-off valve remains open
during shut-off.
First impulse to the turbine: Length of the first impulse to the turbine
Service settings: Settings related to regulation are defined here
PIN for this level: The PIN code for the machine data menu is set here
Master PIN: The PIN code that opens every menu is set here
Set default machine data: The currently configured machine data is accepted as the
default settings for this ECOSTAR.
Factory settings for the machine data are overwritten / replaced!
Open valve slowly: Opens the valve slowly using the settings for closing the valve.