HB EncoderMaster E V1.00.xx rev04.doc 6/15 Baumer Electric AG
09.07.08/wer Frauenfeld, Switzerland
Step 4: Finish the installation by clicking on Finish. The software icon appears on the desktop and in the
Start menu under Programs in the program folder Baumer.
Figure 2: Final window after successful installation
Step 5: First connect the power supply adapter with the BiSS Adaptor. Afterwards connect the BiSS Adaptor
with the USB port of your PC by using a USB-AB cable. A new message „Found New Hardware“ appears in
the taskbar.
Figure 3: Recognition of the BiSS Adaptor
To Next Page
Loading...
Need help?
General
