Baumer EXG03 User Manual

12
2.4. EnvironmentalRequirements
2.4.1. TemperatureandHumidityRange
*)
Temperature
Storage temperature -10°C ... +70°C ( +14°F ... +158°F)
Operating temperature* +5°C ... +50°C (+41°F ... +122°F)
Housing temperature
**)***)
max. +50°C (+122°F)
* For environmental temperatures ranging from (value A) to (value B), please pay atten-
tion to the max. housing temperature. The values are listed in the table below:
CameraType ValueA Value B
Monochrome
EXG03 +25°C (+77°F) +50°C (+122°F)
EXG50 +25°C (+77°F) +50°C (+122°F)
Color
EXG03c +25°C (+77°F) +50°C (+122°F)
Humidity
Storage and Operating Humidity 10% ��� 90%
Non-condensing
T
2.4.2. HeatTransmission
It is very important to provide adequate dissipation of heat, to ensure that the temperature
does not reach or exceed +50°C (+122°F). As there are numerous possibilities for instal-
lation, Baumer do not speciy a specic method for proper heat dissipation, but suggest
the following principles:
operate the cameras only in mounted condition ▪
mounting in combination with forced convection may provide proper heat dissipation ▪
*) Please refer to the respective data sheet.
**) Measured at temperature measurement point (T).
***) Housing temperature is limited by sensor specications.
Figure8►
Temperature measure-
ment points of Baumer
EXG cameras

Baumer EXG03 Specifications

General

Brand	Baumer
Model	EXG03
Category	Security Camera
Language	English