Baumer EXG03 - Notes And Instructions; Warranty Notes; Lens Mounting

36
7. NotesandInstructions
7.1 WarrantyNotes
Notice
Keep camera housing closed.
There are no adjustable parts inside the camera!
In order to avoid the loss of warranty do not open the housing!
Notice
Dismantling/Rework/RepairofBaumerCameras
If it is obvious that the device is / was dismantled, reworked or repaired by other than
Baumer technicians, Baumer Optronic will not take any responsibility for the subse-
quent performance and quality of the device!
7.2 LensMounting
Notice
Avoid contamination of the sensor and the lens by dust and airborne particles when
mounting the lens to the device!
Therefore the following points are very important:
▪ Install the camera in an environment that is as dust free as possible!
▪ Keep the dust cover (bag) on camera as long as possible!
▪ Hold the camera downwards with unprotected sensor.
▪ Avoid contact with any optical surface of the camera!