TA202
48 www.baumer.com
Analog output 0(2)...10 V, 0(4)...20 mA
Resolution 12 bit
Temp. coeffic. typ. ±20 ppm/°C
Outputs relay Potential-free change-over contact
Interfaces RS232, RS422, RS485
Standard DIN EN 61010-1 Protection class II
Overvoltage category II
Pollution degree 2
Emitted interference DIN EN 61000-6-3
Interference immunity DIN EN 61000-6-2
Programmable parameters Assignment F1, F2 or F3
Calculating functions
2 limits, analog output
Slave pointer
Approvals UL approval / E63076
Technical data - mechanical design
Ambient temperature 0...+50 °C
Storing temperature -20...+70 °C
Relative humidity 80 % non-condensing
Connection Plug-in screw terminals
Core cross-section 1.5 mm²
Protection DIN EN 60529 IP 65 (face with seal)
Operation / keypad Membrane with softkeys
Housing type Built-in housing
Dimensions W x H x L 96 x 48 x 124 mm
Cutout dimensions 92 x 44 mm (-0.6)
Mounting depth 124 mm
Mounting Clip frame for built-in housing
Weight approx. 350 g (AC), 250 g (DC)
Material Housing: Makrolon 6485 (PC)
Technical data - trigger level
Comparator inputs Input circuit
Inputs PNP- / NPN-logic
Input level Programmable
Input level Low 0...2 VDC
Input level High 3...40 VDC
Input resistance 3 kΩ
Relay outputs Output circuit
Switching voltage max. 250 VAC / 110 VDC
Switching current max. 1 A
Switching capacity max. 150 VA / 30 W
Relay responding time 5 ms
To Next Page
Loading...